Domino G Series, Руководство по эксплуатации продукта, Страница: 91 / 172

NETWORK SETTINGS
The printer can be controlled through the network by the web browser of a PC, laptop or tablet
or mobile device (smart phone). To do this, make sure the remote setting is enabled, see Remote
on page 78 .
To view the network settings:
1. From the Home screen, select the Settings icon: 1.
2. Select the Network Settings icon: 2.
IP Address
To setup the printer's IP address:
1. From the Home screen, select the Settings icon: 1.
2. Select the Network Settings icon: 2.
3. Adjust the settings listed below:
3.
Name Description
Dynamic Select if the printer will automatically obtain an IP address
from the connected network, or use a static IP address:
• On - Automatically obtain an IP address from the •
network.
• Off - Set a static IP address. •
IP The IP address of the printer:
• If Dynamic is Off , get an IP address from the network •
administrator.
• Make sure that the IP address is in the same range as •
other devices on the network.
• Make sure the address does not conflict with any other •
device on the network.
Subnet mask Set the subnet mask. The subnet mask must match other
devices on the same network.
Default: 255.255.255.0
Default gateway If the printer needs to communicate with devices on a
different network (or the internet), enter the IP address of the
network's default gateway (router).
4. Select Save . 4.
INSTALLATION
EPT077343 EN - Issue 1 - 11 November 2022 91