manualshive.com logo in svg

Domino G Series, Руководство по эксплуатации продукта, Страница: 67 / 172

Поделиться
Скачать
Domino G Series Скачать руководство пользователя страница 67

Bi-Direction

Bi-Direction printing lets the the print direction change from "left to right", and then "right to left".
Use the 

Forward offset (mm)

 setting [5] to set to the printing position for "left to right". See,

Alignment on page 62

.

Use the 

Reverse offset (mm)

 setting [6] to be set to the printing position for "right to left". See,

Alignment on page 62

.

ABC

ABC

1

2

3

4

5

6

#

Description

1

Print head/production line direction (Left to Right).

2

Print head/production line direction (Right to Left).

3

Sensor mark 1

4

Sensor mark 2

5

Forward offset (mm) setting

6

Reverse offset (mm) setting

To enable Bi-Direction mode:

1. From the 

Home 

screen, select the 

Settings 

icon: 

1.

2. Select the 

System Settings

 icon: 

2.
3. Turn 

Bi-Direction 

On.

3.
4. Adjust the 

Time 

value, to set the number of prints that will be made before the print

4.

direction changes.

INSTALLATION

EPT077343 EN - Issue 1 - 11 November 2022

67

Содержание G Series













































































































































































Отзывы:

Нет отзывов