Domino G Series Скачать руководство пользователя страница 66

Страница: 66 / 172

Print Trigger - Sensor

Sensor print trigger mode can be setup in 2 different ways:

•

Use the product detect sensor that is built into the print head, to trigger printing.

•
•

Use an external product detect sensor connected to the IO socket, to trigger printing.

•

A single print trigger can trigger the start of 1, or more than 1 print.
To setup sensor print trigger mode:

1. From the

Home

screen, select the

Settings

icon:

2. Select the

System Settings

icon:

2.
3. Set

Print

trigger to

Sensor

3.
4. Choose the

Sensor mode:

Internal

Use the product detect sensor that is built into the print head,

to trigger printing.

External

Use an external product detect sensor connected to the IO

socket, to trigger printing.

5. Set the

Repeat sensor

value. This setting defines the number of times a print will be

repeated after each print trigger. For example, if

Repeat sensor

is set to 1, one print will be

made after a print trigger. If

Repeat sensor

is set to 2, one print will be made and then the

print will be repeated once after a print trigger.

INSTALLATION

EPT077343 EN - Issue 1 - 11 November 2022

Содержание G Series













































































































































































Результаты поиска

Содержание G Series

Отзывы:

Domino G Series, Руководство по эксплуатации продукта, Страница: 66 / 172

Результаты поиска

Содержание G Series

Отзывы: