manualshive.com logo in svg

Domino G Series, Руководство по эксплуатации продукта, Страница: 15 / 172

Поделиться
Скачать
Domino G Series Скачать руководство пользователя страница 15

ELECTRO-STATIC DISCHARGE

To avoid static discharge from production line equipment, the equipment and everything on it

must be grounded correctly. While it is not Domino's responsibility to maintain the customer's

equipment, the customer must be aware of the importance of grounding. At the time of

installation of the printer, the Domino (or Domino distributor) technician should ensure that the

line the printer is installed on is appropriately grounded. This means that all metallic items within

12 inches (300mm) of the print head location must be securely grounded. This should be

checked with respect to the print head chassis ground using an Ohm Meter, DVM or another

suitable device. It is essential that grounding is checked periodically and that if the printer is

relocated to a different production line, then the new production line is properly grounded.

Additional static dissipating devices, such as static brushes on the line, etc. are recommended.

HEALTH AND SAFETY

EPT077343 EN - Issue 1 - 11 November 2022

15

Содержание G Series













































































































































































Отзывы:

Нет отзывов