Domino G Series, Руководство по эксплуатации продукта, Страница: 137 / 172

Add a Clocks Object
Note The system clock must be set up to print an accurate date/time value. See
Common on page 82 .
To add a clocks object to the label template:
1. Select the Object icon: 1.
2. Select
Clocks. 2.
3. Adjust the settings listed below:
3.
Name Description
Format Set the date/time format. See Clocks Object Formats on page
140 .
Exp. Date Add days to the object value
For example, if the date is January 1st, and
Exp. Date is set to
5 , the date January 6th will be printed.
Roll mode
This setting lets the object continue to print yesterday's date
for a period of time, or print tomorrows date at an earlier time.
For example, if this is set to
Back day , and Roll hours is set to
5 . At 04:00 am, January 2nd, the object will print 04:00 am,
January 1st. Then, at 05:00 am, the object will advance to
today's date and print 05:00 am, January 2nd.
Or, if this is set to
Next day , and Roll hours is set to 5 . At
18:00 pm, January 2nd, the object will print 18:00 pm,
January 2nd. Then, at 19:00 pm, the object will advance to
tomorrow's date date and print 19:00 pm, January 3rd.
• None - Print the current time/date. •
•
Back day - Use the Roll hours setting to continue •
printing yesterday's date for a period of time.
• Next day - Use the Roll hours setting to begin printing •
tomorrow's date at an earlier time.
Roll hours
Note This setting is only valid, if Roll mode is set to
Back day , or Next day .
Set the number of hours that will be added to, or subtracted
from the object's value.
Region Set the date/time region.
Upper case Set upper or lower case text for name of the month formats
(MMM and MMMM).
OPERATION
EPT077343 EN - Issue 1 - 11 November 2022 137