Domino EPT062990, Руководство пользователя

Страница: 9 / 20

8 EPT062879 Issue 3 January 2021
HEALTH AND SAFETY
General
The following safety instructions concern all work carried out on the vision system as well
as in the area close to the vision system. Local restrictions concerning the specific factory
should be taken into consideration.
In particular, users must be familiar with all warning signs and safety procedures.
Associated Equipment
In addition to the illustrated hazards it must be noted that associated equipment could
move during the operation of the supplied vision system. Precautions must be taken to
prevent personnel and clothing becoming caught during these operating procedures.
Heat Sink
The vision system controller heat sink may become hot during operation. Adequate extra
ventilation should be considered if the controller is to be located in a sealed environment.
Cables
All cables associated with the equipment must be safely routed and secured so as not to
present a trip or trap hazard.
Risk Assessment
It remains the responsibility of the customer to perform a Risk Assessment on the printing
equipment installed. Domino can assist where necessary.
Additional Information
Information given in this document should be used in conjunction with the OEM manuals
supplied with the equipment.
WARNING: Industrial Equipment. Risk of Injury
Always read the safety precautions in the User Guide before operating this
equipment.