4
EN
General Information
Parking Cooler
Dometic accepts no liability for damage in the following
cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical
influences and excess voltage
• Alterations to the product without express permission
from Dometic
• Use for purposes other than those described in the
operating manual
Dometic Corporation reserves the right to modify
appearances and specifications without notice.
3 General Information
This section provides information regarding the
tools and materials, component locations, model
identification, external and internal dimensions, and unit
placement.
I
The images used in this document are for reference
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).
3 .1 Tools and Materials
Dometic recommends that the following tools and
materials be used:
Included Parts
Quantity
Cover Frame Universal CoolAir 3rd
Generation
1
Seal 0.4 in. x 0.8 in.
(10 mm x 20 mm)
1 x 2.7 mm
Support Bracket
2
Hex Bolt M8 x 100
4
Threaded Insert With Flange M8
4
Threaded Insert With Flange M6
4
Washer 8.5 x 20 x 1.25
4
Spring Washer M8
4
Nut M8
4
Allen Screw With Cylinder Head
M6 x 110
4
Spacer 6.2 x 10 x 48
8
Included Parts
Quantity
Washer M6
4
Power Cable External Short
RTX 12V
1
Cable Ties
1
1/4 in. Hex Bit
1
80 A Fuse
1
200 A Fuse Holder
1
2 A Fuse
1
Cable Terminals for Battery Cable
AWG 4 3/8 in.
2
Cable Terminal for Fuse Holder
1/4 in.
2
Ring Terminal 0.02 in. (0.5 mm)
2
Joint Connector 0.02 in. (0.5 mm)
1
2 A Fuse Holder
1
Loom Tubing 9.8 ft (3 m)
1
Opening Template
18.9 in. x 15.3 in. (480 mm x
390 mm)
1
Seal 35 x 20 x 3000
1
Recommended Tools
Angle Grinder
Impact Gun
Cutting Disc for Metal
Screwdriver Bit Set
Extension Cord
Hole Saw Set
Drill
Self Tapping Screws
Automotive Staple Remover
Flat Head Screwdriver
Phillips Screwdriver
Pliers
Side Cutters
