18
EN
Using the Parking Cooler
Parking Cooler
It is recommended that you:
• Park your vehicle in the shade when possible.
• If you do not have a vehicle air conditioning system,
air out your vehicle well before using the parking
cooler. You should always cool Down the vehicle
interior before a rest period using the vehicle air
conditioning system.
• Keep doors and windows closed.
• Avoid any heat sources in the vehicle.
• Reduce the power consumed by other products to
ensure the maximum possible operating time of the
parking cooler.
• Select a suitable temperature and operating mode.
• Make sure the blower nozzles and intake grille are not
covered by cloths, paper, or other objects.
• The best cooling capacity is achieved when the
blower nozzles are not directed towards the intake
grille.
10 .1 Turning the Parking Cooler On
With the system switched off, press the
On/Off
button.
The following occurs upon system startup:
• The fan starts.
• The Power LED illuminates.
• The digital display shows the current status of the
parking cooler.
I
Depending on the system status, the system
compressor is switched on with a delay of up to 180
seconds.
10 .2 Switching the Parking Cooler
to Standby Mode
Briefly press the
On/Off
button to switch the parking
cooler to standby mode. The following occurs upon
switching to standby mode:
• The parking cooler saves the current settings.
• The power LED continues to stay illuminated.
I
When the parking cooler is in BOOST mode and
switched to standby mode, it will start the next
time in AUTO mode. A running timer is set to 0 by
switching the parking cooler in standby mode.
The parking cooler switches completely off after 12
hours in standby mode to save power.
10 .3 Turning the Parking Cooler Off
Press the
On/Off
button for at least 3 seconds to switch
off the parking cooler. The following occurs upon system
shutdown.
• The parking cooler saves the current settings.
• The power LED is no longer illuminated.
I
When the parking cooler is in BOOST mode and
switched off, it will start the next time in AUTO
mode. A timer is set to 0 by switching the parking
cooler off. If the parking cooler is switched off
while the compressor is still operating, the fan
will continue to run for 20 seconds to dry the
evaporator.
10 .4 Using Menus
You can set the parking cooler to suit your requirements
using the menus.
1. Press the
List
button to browse through the menus.
2. Press the
Up
or
Down
button to navigate to the
appropriate sub-menu or to change the selected
value.
3. Press the
Down
button to reduce the selected value.
4. Press the
Up
button to increase the selected value.
I
The parking cooler switches off completely after 12
hours in standby mode to save power.
