background image

6

• After removal from the packaging, make sure the appliance is not damaged. Do not

operate a damaged unit. If in doubt please call your dealer.

• Before use thoroughly clean the inside of the refrigerator (See chapter “Cleaning”)

The appliance must be thoroughly dried after cleaning.

Electrical Connection

Internal Batteries

• The unit is equipped with 2 rechargeable deep cycle batteries integrated in the

compressor compartment.  If no external power supply is available, the unit is

operated with this battery system until the integrated battery guard switches off

the unit.

• The charge status of the batteries during charging process is shown by the LED on

the control panel (see chapter „Operation - Charging LED“).

• The LED is switched off if no AC power supply is connected.

Circuit Breaker

• The RCCA920 is equipped with a circuit breaker (80A) in

the DC-circuit for the protection of the battery circuit. 

• The circuit breaker is located on the backside of the

refrigerator.

IMPORTANT !

On delivery, the circuit breaker is in „OFF“-position. Before connection to AC, make

sure that the circuit breaker is switched to „ON“ position! If the circuit breaker is

switched on afterwards the batteries will not charge!

• There is no need to switch the circuit breaker off at any time. Leave it in „ON“

position during normal use of the appliance.

Connection to AC / Charging the batteries

• The unit must be connected to AC power supply to charge

the batteries. If the unit is switched on during charging

process, the charging time of the batteries will be

prolonged. 

• Before connecting the unit, check whether the details on

the dataplate correspond to local values. 

• The connection to AC is done with the supplied removable

connection cable. The socket for AC connection is located

at the right side of the appliance.

• The battery LED on the control panel lights up as soon as

the AC-plug is connected. 

• The AC circuit is protected by a 5A-fuse located in the connection socket.

O

N

AC-Connection

fuse 5A

O

N

Circuit Breaker

Содержание RCCA 920












Отзывы: