EN
FreshJet3000
Operating the roof air conditioner
19
✓
The switch-off time is set on the roof air conditioner.
Switch the roof air-conditioner to Stand-by.
Cancelling timer settings
If you have set the timer, you can cancel these settings as follows:
➤
Press the
button once.
✓
The timer symbol disappears.
✓
The setting has been cancelled.
7.10
Activating the sleep function
I
When the sleep function is activated, the compressor speed and the fan speed is
limited to a lower level to reduce the noise levels for easier sleeping.
➤
Set the required temperature (see chapter “Setting the temperature” on
page 17).
➤
Press the
button.
✓
The
symbol appears in the display.
The sleep function is activated.
➤
To deactivate the sleep function press the
button again.
I
7.11
Operating the ambient lights
I
Switching the lights on/off with the control panel
➤
Briefly press the
button to switch the lights on or off.
NOTE
The sleep function is only available in “Cooling” (
)" or “Heating” (
)
modes.
NOTE
The sleep function is deactivated if the
MODE
button is pressed.
NOTE
The
button on the remote control is active even if the remote control
is switched off.
FreshJet3000-OPM.book Seite 19 Donnerstag, 27. Februar 2020 4:17 16
