Dometic BUTTNER MT iQ SolarPRO, Инструкция по установке и эксплуатации

Страница: 11 / 116

MT iQ SolarPRO Installing the solar monitor
EN
11
• House battery voltage (V)
• Generated solar capacity (Ah)
The solar monitor is suitable to detect the solar power of several independent solar systems.
5.1 Operating elements
5.2 Display elements
6 Installing the solar monitor
!
No. in
fig.
2
,
page 3
Description
1
On/ off button
2 Display
No. in
fig.
3
,
page 3
Description
1 Solar power (actual input in %, alphanumeric)
2 Solar power (actual input in %, bar graph)
3 Sun symbol (indicates the intended use as a solar measuring device;
no function)
4 Main display
5 Total solar charge generated (Ah)
6 Actual charging current (A) / house battery voltage (V)
The electrical power supply must be connected by a qualified electrician who has
demonstrated skill and knowledge related to the construction and operation of
electrical equipment and installations, and who is familiar with the applicable
regulations of the country in which the equipment is to be installed and/or used,
and has received safety training to identify and avoid the hazards involved.
WARNING! Electrocution hazard
Disconnect the solar panels and the solar charger fuse before installing the solar
monitor.