DOM GUARD S Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 96

DOM GUARD S Скачать руководство пользователя страница 65

Installation

65

GUARD S Wideline set with rosettes

You can attach the GUARD S Wideline with four long screws next to one
another in pairs. The lever handle rosette and cylinder rosette are attached on
the inside.

Before attaching the handle, you must attach the spindle to the handle.

The lever handle is assembled on the electronic handle at the factory.
The alignment of the lever handle is described from page 37 onwards.
A description of how to attach the spindle is provided from page 38
onwards.
A description of how to attach the spindle with reducing bushes is
provided from page 40 onwards.

ATTENTION!

Damage to the electronic components of the handle due to
contact possible.



Do not touch the electronic components of the handle.



Touch an earthed object made of metal to discharge any
electrostatic charge before continuing work.

A heater or tap are examples of suitable earthed objects.



If necessary remove the cover from the electronic assembly profile as
described from page 91 onwards.



Ensure that the lever handle on the inside handle is aligned correctly (see
page 36).



When using adapter sleeves, make sure that these are attached correctly
(see page 40).

The assembly profiles are screwed down to both sides of the door. Threads
are provided in the outer assembly profile and in the outer cover for this

«
...
63
64
65
66
67
...
»

Содержание GUARD S

































































































Отзывы:

Нет отзывов