DOM GUARD S, Руководство по сборке и эксплуатации, Страница: 35 / 96

Installation
35
CAUTION
Risk of injury due to the outer handle falling down.
The outer handle of GUARD S handles is heavier than usual
handles due to the security function. The feet can be injured
due to the outer handle falling down during assembly.

Wear suitable protective clothing.

Make sure that the handle does not fall down.
Preparing installation

Remove the handle from the original packaging.

Keep the original packaging for later use.
The original packaging will be necessary for storage at a later date or sending
after use.
The scope of supply depends on the properties of the handle which was
ordered, the door and the lock which were stated in your order.

Check whether all components of the handle were supplied.

Check whether all accessories ordered were supplied.

Check all parts supplied for flawless condition.
Check the following points in particular:
•
Does the spindle which was supplied have the correct dimensions for the
lock and the door?
•
Were the correct adapter sleeves supplied (type and dimensions)?

If parts are missing, damaged or supplied with incorrect measurements,
contact the appropriate specialist retailer or the manufacturer.

Ensure that the door is correctly attached.

Ensure that the door is not warped.

Ensure that the door is not under strain.

Ensure that the door’s construction type makes installation of the handle
possible.

Ensure that the door has appropriate drill holes for attachment of the handle
in line with the applicable standards where necessary.
Check the following points in particular:
•
Are the holes at the attachment points present and sufficiently large?
•
Have chippings which developed during drilling been removed properly?
•
Was the hole in the lock calibrated properly with the hole in the door?