Features:
·Apply high-speed brushless DC motor that produces 65m/s jet airflow
·Dry hands in 6-12 seconds
·Long service life brushless DC motor
·Intelligentized,simple operation and a big LCD display screen
·Unique design,energy-saving, economical and durable
Components:
ķ
LCD screen
ĸ
upper sensor
Ĺ
lower sensor
ĺ
power switch
Ļ
front cover
ļ
water tank
Installation:
Figure 1
·Electrical connection must be made to the fixed wiring of the property using a double ploe
isolating switch,with a break contact distance of at least 3mm.
·This product must be grounded.
1. Please pull out the three screws which indicated by “----- >on the back of the hand dryer before
installation
2. Take off the plugs(14)and the screws(13)from both sides of the hand dryer,and take off the
hanger board (17).(Figure 3)
3. Put the hanger board on the suitable position on the wall, drill 5 holes that diameters are 8mm
(0.3
Ͳ
),and then remove the hanger board.( Figure 2)
4. Put the plugs(16)into the holes, and fix the hanger board on the wall with the screw.( Figure 3)
5. Hang the hand dryer to the hanger board.( Figure 3)
6. Keep the hand dryer by the screws on both side, and cover the screws by the screw
caps.(Figure 3)
7. Plug in the hand dryer,and switch on to use it.(Figure 1)
BC 2011 User Manual www.dolphindispensers.co.uk
Thank you for purchasing the BC 2011 Dolphin Velocity Hand Dryer.
This product adopts CPU control,wide LCD display screen, and is durable and ergonomic. It
applies high-speed brushless DC motor to produce jet airflow that dries your hands in 6-12
seconds. It has high efficiency that can save your time,and it takes only 1/3 of the power that
general hand dryers use to achieve same effect.It is energy-saving, environmental friendly,
economical and durable.This product is especially suitable for hotel, office, store and other public
places.