BC
2003BM User Manual
www.dolphinsolutions.co.uk
【
Type Y attachment
】
If the power supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similar qualified person in order to
avoid a hazard. Means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Circuit Diagram
Circuit Board Module
Transistor
Power Switch
MO2 HE2
N
MO1 HE1
L
Transistor
Power Switch
VR
G
N
L
Red(110-120V)/Brown (208-240~277V)
Black
Black
G/Y
Blue
Brown
Motor
Wi
th
Thermal
Switch
2A
Heater
Wi
th
Thermo-fuse
FOR SENSOR
SW.
FOR HEATER
White(110-120V)/Blue (208-240~277V)
Sensor module
ON
1
VR
FOR MOTOR
G
G/Y
Y2 Filter
(
ONLY
208~240V)
(
ONL
Y
208~240V)
General safety information
N
OTE: We do not recommend that this dryer is installed above a basin. If you are installing
this dryer above a basin you need to satisfy yourself that reflection won’t occur.
Disconnect power at the service breaker before
installing or servicing. Not for household use
may cause burns.
This product is intended for installation by a
qualified service person.
Use 1.2mm² solid conductor for wiring.
All units must be supplied with a 3-wire service.
The ground wire must be connected to the
dryer's backplate.
Failure to properly ground unit could result in
severe electrical shock and/or death.
WARNING
WARNING
DANGER
WARNING
Thermostat
Operating Instructions and Parts Manual
Hand drier
