Dolphin PTM 216Z Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 43

Dolphin PTM 216Z Скачать руководство пользователя страница 2

USER MANUAL

PTM 216Z – 2.4 GHz Zigbee Generic Switch Pushbutton Transmitter Module

© 2018 EnOcean | www.enocean.com

F-710-017, V1.0

PTM 216Z User Manual | v1.2 | November 2018 | Page 2/43

REVISION HISTORY

The following major modifications and improvements have been made to this document:

Version Author Reviewer Date

Major Changes

1.0

MKA

MKA

04.09.2018 Initial Release

1.1

MKA

MKA

19.10.2018 Updated version for product release

1.2

MKA

MKA

07.11.2018 Addition of channel lock

Published by EnOcean GmbH, Kolpingring 18a, 82041 Oberhaching, Germany

www.enocean.com, [email protected], phone +49 (89) 6734 6890

© EnOcean GmbH, All Rights Reserved

Important!

This information describes the type of component and shall not be considered as assured
characteristics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry
and specifications are subject to change without notice. For the latest product specifica-

tions, refer to the EnOcean website:

http://www.enocean.com

.

As far as patents or other rights of third parties are concerned, liability is only assumed for

modules, not for the described applications, processes and circuits.
EnOcean does not assume responsibility for use of modules described and limits its liability
to the replacement of modules determined to be defective due to workmanship. Devices or

systems containing RF components must meet the essential requirements of the local legal
authorities.
The modules must not be used in any relation with equipment that supports, directly or

indirectly, human health or life or with applications that can result in danger for people,
animals or real value.
Components of the modules are considered and should be disposed of as hazardous waste.

Local government regulations are to be observed.
Packing: Please use the recycling operators known to you.

«
1
2
3
4
...
»

Содержание PTM 216Z












































Отзывы:

Нет отзывов