Figure 87: Configuring the microphone
16.9 Configuring EQ settings
You can configure the EQ settings on the Dolby IMS3000. The installer can adjust the EQ
settings for each speaker and array.
You need administrator or installer privileges to access the
Equalization
tab of the
Cinema
Audio
section.
Note:
You cannot edit the AutoEQ preset parameters. However, you can save a copy of
these parameters under a different name, and make changes to the copy.
16.9.1 Adding an EQ preset
You can add a new EQ preset on the Dolby IMS3000.
Procedure
1. Select the automatic EQ (
AutoEq
) preset or a copy of a previously created customized preset
from the
EQ Preset List
drop-down menu.
2. Enter a name for the new preset, and then click
Ok
to save your new preset.
3. Click
Edit
to edit the EQ parameters.
4. Configure the parameters as needed, and then click
Save
to save the new preset.
You can click
Delete
to delete a customized preset.
Figure 88: Adding an EQ preset list
16.9.2 Loading or editing an EQ preset
You can load or edit an EQ preset on the Dolby IMS3000.
Procedure
1. Select the desired preset in the
EQ presets
menu.
You can edit a customer preset, or you can make a copy of the default preset and save it
under a different name.
Configuring cinema audio on the Dolby IMS3000
Dolby IMS3000 User
ʼ
s Manual
10 December 2018 IMS.OM.005280.DRM Issue 4
93
