The BALL TRAINER complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation. This is a sensitive radio device. Any unauthorized changes
or modifications to this device that are not expressly approved by Dogtra will void the
warranty, and may void the user’s authority to operate the equipment.
Please do not tamper or modify the unit.
FCC WARNING
DOGTRA PRODUCT WARRANTY
LIMITED WARRANTY
For Dogtra Products Purchased from Dogtra Authorized Dealers
One-Year Warranty
Except as otherwise provided below, Dogtra warrants to the original retail purchaser (“You”)
that its Dogtra products shall be free of defects in materials and workmanship for a period of
one (1) year from the date of purchase (“Warranty”). The Warranty covers the cost of repair
(parts and labor) or replacement (if repair is not feasible) of a defective Dogtra product during
said one-year period. For such repaired or replaced products, the remaining portion of the
original warranty period, or ninety (90) days, whichever is longer, shall apply. Dogtra, at its sole
discretion, shall determine whether to repair or replace a product covered by the Warranty.
Warranty Conditions
The Warranty is not transferrable and applies to your Dogtra product only if:
(1) You are the original retail purchaser of the product,
(2) You bought the product from a Dogtra authorized dealer, and
(3) You present a receipt or other proof of purchase showing a valid purchase date, the
name and address of the authorized dealer, and the purchased product identified by
model and/or serial number.
Warranty Exclusions
The Warranty does not cover damage, loss, or deterioration to your Dogtra product caused:
by misuse, neglect, abuse, or other improper handling of the product; by failure to follow use
or care instructions; by use of the product for other than its intended purpose; by accident
or natural forces such as fire or flooding; or by normal wear and tear such as scratches to the
product surface.
The Warranty also does not cover Dogtra products that: are purchased from
non-authorized dealers; are purchased outside of the United States or Canada; have been
damaged during shipment (even if Dogtra paid or arranged for shipping); have been modified
or tampered with in any manner; are opened or repaired by anyone other than Dogtra; or have
serial numbers that have been altered or defaced.
Sole Warranty
This Warranty is the only warranty offered by Dogtra for its Dogtra products. Other than said
Warranty, Dogtra makes no other representations or warranties whatsoever regarding its
products, whether oral or in any product manual, on any packaging, on any website, or in any
other written material. No dealer of Dogtra products, nor any employee or agent of Dogtra, is
authorized to make any additions, changes, or extensions to the Warranty. Dogtra, at its sole
discretion and at any time, reserves the right to modify the Warranty.
DISCLAIMER OF OTHER WARRANTIES
THE FOREGOING WARRANTY IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, WHETHER
EXPRESS OR IMPLIED. DOGTRA DISCLAIMS ANY IMPLIED WARRANTIES INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
1. Make sure that the receiver is off.
2. Hold down the on/off button on top of the receiver for 5 seconds until the
green LED blinks rapidly on the receiver.
3. Release your finger from the receiver button.
4. Press the number on the transmitter that you would like to code the
receiver to. You may check that it is properly coded by pressing the
button on the transmitter, which will activate the LED indicator light on
the receiver at the same time.
* You can code up to eight receivers to one transmitter
Warning!
Do not use any other transmitter when programming a new receiver.
The receiver can accidentally code to another transmitter if used at the
same time. If this happens, you will need to recode the receiver to the
correct transmitter.
Follow the steps below to code a BALL TRAINER series transmitter to a
new or existing receiver.
