3931232/2009.02/C - The right to make technical changes reserved!
5
Doepke
Engli
s
h
figuration:
11. Guarantee
All professionally installed, unaltered devices are covered by warranty during the statu-
tory guarantee period from the day of purchase by the end user. The guarantee is not ap-
plicable to damage incurred during transport or caused by short-circuit or overloading. In
the event of defects in workmanship or material, which are discovered within the guar-
antee period, the company will provide a replacement free of charge.
12. Technical Data
Pin
Description
Pin
Description
1
Dupline signal cond.+ ()
2
Dupline signal cond. - (Dupline-)
Min.
Typ.
Max.
Dupline
Current input
800 µA
Input channels 1 Temperature value, AnaLink method
Output channels None
Temperature sensor
Type PT1000
Measuring range
-30°C
+60°C
Resolution 8 Bit (approx. 0.35°C/Bit)
Operating Voltage
Rated operating voltage Not required (supplied by Dupline signal line)
Terminals
Type Strain-relief clamps
Contact area
0.4 mm
2.5 mm²
Housing
Type not available (open printed circuit board)
Dimensions 52 x 52 x 20 (W x H x D in mm)
General technical data
Ambient temperature
-30°C
+60°C
Encl. protection type /
standards
-
Order number, description 09 501 172, DTS 2-P
