STARTING AND OPERATING
31
Disabling SSC
SSC will deactivate and be disabled if any of the
following conditions occur:
The driver pushes the SSC switch.
The driveline is shifted out of the 4WD Low.
The parking brake is applied.
The driver door opens.
The vehicle is driven greater than 20 mph
(32 km/h) for greater than 70 seconds.
The vehicle is driven greater than 40 mph
(64 km/h). SSC will exist immediately.
Feedback To The Driver
The instrument cluster has an SSC icon and the
SSC switch has a lamp which offers feedback to
the driver about the state SSC is in.
The cluster icon and switch lamp will illumi
-
nate and remain on solid when SSC is
enabled or activated. These are the normal
operating conditions for SSC.
The cluster icon and switch lamp will flash for
several seconds then extinguish when the
driver pushes the SSC switch but enabled
conditions are not met.
The cluster icon and switch lamp will flash for
several seconds then extinguish when SSC
disables due to excess speed.
The cluster icon and switch lamp will flash
then extinguish when SSC deactivates due to
overheated brakes.
TRX M
ODES
Description
TRX Modes combine the capabilities of the
vehicle control systems, along with driver input,
to provide the best performance for all terrains.
Use the TRX switch and selection arrows to
select the desired mode.
TRX Switch
WARNING!
SSC is only intended to assist the driver in
controlling vehicle speed when driving in
off-road conditions. The driver must remain
attentive to the driving conditions and is
responsible for maintaining a safe vehicle
speed.
1 — TRX Button
2 — Left Arrow
3 — Right Arrow
4
21_DT_TRX_SU_EN_USC_t.book Page 31