100
SERVICING AND MAINTENANCE
3. Remove the engine air cleaner filter
elements from the housing assembly.
Air Cleaner Filter Elements
Engine Air Cleaner Filter Installation
NOTE:
Inspect and clean the housing if dirt or debris is
present before replacing the engine air cleaner
filter element.
1. Install the engine air cleaner filter
elements into the housing assembly with
the filter inspection surface facing
downward.
2. Install the engine air cleaner filter cover
onto the housing assembly.
3. Tighten the fasteners (ten) on the engine air
filter cleaner assembly and the air hose
clamp.
4. Reinstall the beauty cover.
C
OOLING
S
YSTEM
CAUTION!
Do not over tighten the air cleaner filter cover
lid screws or damage to the cover may result.
WARNING!
You or others can be badly burned by hot
engine coolant (antifreeze) or steam from
your radiator. If you see or hear steam
coming from under the hood, do not open
the hood until the radiator has had time to
cool. Never open a cooling system pressure
cap when the radiator or coolant bottle is
hot.
Keep hands, tools, clothing, and jewelry
away from the radiator cooling fan when
the hood is raised. The fan starts automati
-
cally and may start at any time, whether the
engine is running or not.
When working near the radiator cooling fan,
disconnect the fan motor lead or turn the
ignition to the OFF mode. The fan is
temperature controlled and can start at any
time the ignition is in the ON mode.
21_DT_TRX_SU_EN_USC_t.book Page 100