Dodge RAM 1500 2018, Дизельная добавка

Страница: 153 / 230

POWER TAKE OFF OPERATION — IF EQUIPPED
(CHASSIS CAB ONLY)
This vehicle when equipped with PTO Prep and either the
AS69RC automatic six-speed or G-56 manual six-speed
transmissions, will allow for an aftermarket upfit with a
transmission driven PTO (power take off). The customer
will have the ability to operate the PTO in either a
“stationary” or “mobile” mode. The vehicles will be factory
set to the “stationary” mode. To select ’mobile mode’ You
will need to enter the commercial vehicle menu on the
instrument cluster display and select mobile PTO mode.
Details of the PTO selection modes and further PTO
information is available at the Ram Truck Bodybuilders
web site:
www.rambodybuilder.com .
AS69RC Six-Speed Automatic Transmission Only
The PTO drive gear (part of the AS69RC) operates at torque
converter turbine speed. The turbine speed will be less
than engine speed when the torque converter clutch is not
engaged and will be same as engine speed when the torque
converter clutch is engaged.
Stationary Mode
To operate the PTO in this mode the vehicle must meet the
following conditions:
•
Transmission in PARK position (vehicles equipped with
automatic transmission.)
•
PTO switch has been activated.
•
Parking brake applied (vehicles equipped with manual
transmission).
•
Brake pedal must not be applied.
•
Vehicle engine must be running.
•
No vehicle, brake or clutch switch faults present.
•
PTO must be correctly installed using the vehicle pro-
vided circuits.
The instrument cluster will display a
⬙
PTO On
⬙
message for
five seconds if the above conditions are met. Otherwise, the
instrument cluster will display a message
⬙
To Operate PTO
Shift To Park
⬙
indicating what operator action should be
taken to engage the PTO mode.
4
STARTING AND OPERATING 151