Dodge Durango SRT 2018, Руководство пользователя

Страница: 175 / 664

To increase the distance setting, push the Dis-
tance Setting — Increase button and release.
Each time the button is pushed, the distance
setting increases by one bar (longer).
To decrease the distance setting, push the Dis-
tance Setting — Decrease button and release.
Each time the button is pushed, the distance
setting decreases by one bar (shorter).
If there is no vehicle ahead, the vehicle will
maintain the set speed. If a slower moving
vehicle is detected in the same lane, the instru-
ment cluster displays the “Sensed Vehicle Indi-
cator” icon, and the system adjusts vehicle
speed automatically to maintain the distance
setting, regardless of the set speed.
The vehicle will then maintain the set distance
until:
•
The vehicle ahead accelerates to a speed
above the set speed.
•
The vehicle ahead moves out of your lane or
view of the sensor.
•
The distance setting is changed.
•
The system disengages. (Refer to the infor-
mation on ACC Activation).
The maximum braking applied by ACC is lim-
ited; however, the driver can always apply the
brakes manually, if necessary.
NOTE:
The brake lights will illuminate whenever the
ACC system applies the brakes.
A Proximity Warning will alert the driver if ACC
predicts that its maximum braking level is not
sufficient to maintain the set distance. If this
occurs, a visual alert “BRAKE” will flash in the
instrument cluster display and a chime will
sound while ACC continues to apply its maxi-
mum braking capacity.
NOTE:
The “Brake!” Screen in the instrument cluster
display is a warning for the driver to take action
and does not necessarily mean that the Forward
Collision Warning system is applying the brakes
autonomously.
Overtake Aid
When driving with ACC engaged and following a
vehicle, the system will provide an additional
acceleration up to the ACC set speed to assist in
passing the vehicle. In locations with left hand
drive traffic, an additional acceleration is trig-
gered when the driver utilizes the left turn signal
and will only be active when passing on the left
hand side. In locations with right hand drive
traffic, an additional acceleration is triggered
when the driver utilizes the right turn signal and
will only be active when passing on the right
hand side.
NOTE:
When the vehicle transitions from a location with
left hand drive traffic to a location with right hand
drive traffic or vice-versa, the ACC system will
automatically detect the direction of traffic.
ACC Operation At Stop
If the ACC system brings your vehicle to a
standstill while following a target vehicle, if the
target vehicle starts moving within two seconds
of your vehicle coming to a standstill, your
vehicle will resume motion without the need for
any driver action.
Distance Setting 1 Bar (Short)
Brake Alert
172