3. Select
located under DEVICES next to
Uconnect.
4. Turn “Show Notifications” to on.
Android Devices
1. Press the Menu button on the mobile phone.
2. Select “Settings.”
3. Select “Connections.”
4. Turn “Show Notifications” to on.
• A pop up will appear asking you to accept
a request for permission to connect to
your messages. Select “Don’t ask again”
and press OK.
NOTE:
All incoming text messages received during the
current ignition cycle will be deleted from the
Uconnect system when the ignition is turned to
the OFF position.
Helpful Tips And Common Questions To
Improve Bluetooth Performance With Your
Uconnect System
Mobile Phone won’t reconnect to system after
pairing:
• Set mobile phone to auto-connect or trusted
device in mobile phone Bluetooth settings
(Blackberry devices).
• Perform a factory reset on your mobile phone.
Refer to your mobile phone manufacturer or
cellular provider for instructions.
• Many mobile phones do not automatically
reconnect after being restarted (hard reboot).
Your mobile phone can still be connected
manually. Close all applications that may be
operating (refer to mobile phone manufactur-
er’s instructions), and follow “Pairing (Wire-
lessly Connecting) Your Mobile Phone To The
Uconnect System”.
Mobile Phone won’t pair to system:
• Perform a hard reset in the mobile phone by
removing the battery (if removable — see your
mobile phone’s owner manual).
Enable iPhone Incoming Text Messages
Enable Android Device Incoming Text
Messages
MUL
TIMEDIA
256
Содержание DURANGO 2019
