Dodge 2016 Challenger Hellcat, Руководство пользователя

Страница: 274 / 622

Current G-Force
When selected, this screen displays the current G-Force
(lateral and longitudinal) that displays the directions of
the forces.
Peak G-Force
When selected, this screen displays all four G-Force
values (two lateral and two longitudinal).
•
When a force greater than zero is measured, the
display will update the value as it climbs. As the
G-Force falls, the peak forces will continue to display.
•
Push and hold the OK button to clear the peak force
values.
Lap Timer
When selected, the Lap Timer page will show the timer
always at 0:00.00 with the previous Best and Last time
data (unless the driver has cleared it via hold to Reset).
•
Pushing the OK button will start “current” timer from
0:00.0.
•
When the OK button is pushed, the times are updated
accordingly.
•
As soon as the driver exits the Lap Timer pages, the
“current” timer will stop and the time will be reset to
0:00.00.
•
If the driver stays on the Lap Timer pages, the “cur-
rent” timer will reset to 0:00.0 when ignition is placed
in the off position, or ignition placed in the ON
position (or will roll over at 59:59.99 if ever possible).
•
Each time the driver pushes the OK button for a Lap
that current time populates, the Last time and also
populates the 1st (top) space on the Timer History
page the current time resets to 0:00.0 at every push of
the
OK button.
272 UNDERSTANDING YOUR INSTRUMENT PANEL