Dodge 2015 Journey Скачать руководство пользователя страница 621

Страница: 621 / 648

Call toll free at:

•

1–800–890–4038 (U.S.)

•

1–800–387–1143 (Canada)

Or
Visit us on the Worldwide Web at:

•

www.techauthority.com

DEPARTMENT OF TRANSPORTATION UNIFORM
TIRE QUALITY GRADES

The following tire grading categories were established by

the National Highway Traffic Safety Administration. The

specific grade rating assigned by the tire’s manufacturer

in each category is shown on the sidewall of the tires on

your vehicle.
All passenger car tires must conform to Federal safety

requirements in addition to these grades.

Treadwear

The Treadwear grade is a comparative rating, based on

the wear rate of the tire when tested under controlled

conditions on a specified government test course. For

example, a tire graded 150 would wear one and one-half

times as well on the government course as a tire graded

100. The relative performance of tires depends upon the

actual conditions of their use, however, and may depart

significantly from the norm due to variations in driving

habits, service practices, and differences in road charac-

teristics and climate.

Traction Grades

The Traction grades, from highest to lowest, are AA, A, B,

and C. These grades represent the tire’s ability to stop on

wet pavement, as measured under controlled conditions

on specified government test surfaces of asphalt and

IF YOU NEED CONSUMER ASSISTANCE 619

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Journey

Отзывы:

Бренды по названию

Популярные бренды

Dodge 2015 Journey, Руководство пользователя

Результаты поиска

Содержание 2015 Journey

Отзывы:

Бренды по названию

Популярные бренды