Dodge 2015 Journey Скачать руководство пользователя страница 577

Страница: 577 / 648

Frequency Of Fluid Change

Refer to the “Maintenance Schedule” for the proper

maintenance intervals.

Appearance Care And Protection From Corrosion

Protection Of Body And Paint From Corrosion

Vehicle body care requirements vary according to geo-

graphic locations and usage. Chemicals that make roads

passable in snow and ice and those that are sprayed on

trees and road surfaces during other seasons are highly

corrosive to the metal in your vehicle. Outside parking,

which exposes your vehicle to airborne contaminants,

road surfaces on which the vehicle is operated, extreme

hot or cold weather and other extreme conditions will

have an adverse effect on paint, metal trim, and under-

body protection.

The following maintenance recommendations will enable

you to obtain maximum benefit from the corrosion

resistance built into your vehicle.

What Causes Corrosion?

Corrosion is the result of deterioration or removal of

paint and protective coatings from your vehicle.
The most common causes are:

•

Road salt, dirt and moisture accumulation.

•

Stone and gravel impact.

•

Insects, tree sap and tar.

•

Salt in the air near seacoast localities.

•

Atmospheric fallout/industrial pollutants.

MAINTAINING YOUR VEHICLE 575

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Journey

Отзывы:

Бренды по названию

Популярные бренды

Dodge 2015 Journey, Руководство пользователя

Результаты поиска

Содержание 2015 Journey

Отзывы:

Бренды по названию

Популярные бренды