Dodge 2015 Journey Скачать руководство пользователя страница 569

Страница: 569 / 648

If an examination of your engine compartment shows no

evidence of radiator or hose leaks, the vehicle may be

safely driven. The vapor will soon dissipate.

•

Do not overfill the coolant expansion bottle.

•

Check the coolant freeze point in the radiator and in

the coolant expansion bottle. If engine coolant (anti-

freeze) needs to be added, the contents of the coolant

expansion bottle must also be protected against freez-

ing.

•

If frequent engine coolant (antifreeze) additions are

required, the cooling system should be pressure tested

for leaks.

•

Maintain engine coolant (antifreeze) concentration at a

minimum of 50% OAT coolant (conforming to

MS-12106) and distilled water for proper corrosion

protection of your engine which contains aluminum

components.

•

Make sure that the coolant expansion bottle overflow

hoses are not kinked or obstructed.

•

Keep the front of the radiator clean. If your vehicle is

equipped with air conditioning, keep the front of the

condenser clean.

•

Do not change the thermostat for Summer or Winter

operation. If replacement is ever necessary, install

ONLY the correct type thermostat. Other designs may

result in unsatisfactory engine coolant (antifreeze)

performance, poor gas mileage, and increased emis-

sions.

Brake System

In order to assure brake system performance, all brake

system components should be inspected periodically.

Refer to the “Maintenance Schedule” for the proper

maintenance intervals.

MAINTAINING YOUR VEHICLE 567

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Journey

Отзывы:

Бренды по названию

Популярные бренды

Dodge 2015 Journey, Руководство пользователя

Результаты поиска

Содержание 2015 Journey

Отзывы:

Бренды по названию

Популярные бренды