Dodge 2015 Journey Скачать руководство пользователя страница 553 | Manualshive

Страница: 553 / 648

Dodge 2015 Journey Скачать руководство пользователя страница 553

WARNING!

(Continued)

for repair or maintenance. Make sure that no one is
near the engine compartment before starting the
vehicle with the air induction system (air cleaner,
hoses, etc.) removed. Failure to do so can result in
serious personal injury.

Engine Air Cleaner Filter Selection

The quality of replacement engine air cleaner filters

varies considerably. Only high quality filters should be

used to assure most efficient service. MOPAR® engine air

cleaner filters are a high quality filter and are recom-

mended.

Maintenance-Free Battery

Your vehicle is equipped with a maintenance-free battery.

You will never have to add water, nor is periodic main-

tenance required.

NOTE: The battery is stored in a compartment that is
located behind the left front fender and is accessible
through the wheel well. The wheel and tire assemble
do not need to be removed to access the compartment.
Remote battery terminals are located in the engine
compartment for jump-starting. Refer to “Jump-
Starting Procedures” in “What To Do In Emergencies”
for further information.

To access the battery, turn the steering wheel fully to the

right and remove the access panel from the inner fender

shield.

7

MAINTAINING YOUR VEHICLE 551

«
...
551
552
553
554
555
...
»

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов