Dodge 2015 Journey Скачать руководство пользователя страница 484

Страница: 484 / 648

Problems that result from using gasoline containing

Methanol or gasoline containing more than 10% Ethanol

are not the responsibility of the manufacturer and may

not be covered under New Vehicle Limited Warranty.

E-85 Usage In Non-Flex Fuel Vehicles

Non-Flex Fuel Vehicles (FFV) are compatible with gaso-

line containing 10% ethanol (E10). Gasoline with higher

ethanol content may void the New Vehicle Limited

Warranty.
If a Non-FFV vehicle is inadvertently fueled with E-85

fuel, the engine will have some or all of these symptoms:

•

Operate in a lean mode.

•

OBD II “Malfunction Indicator Light” on.

•

Poor engine performance.

•

Poor cold start and cold drivability.

•

Increased risk for fuel system component corrosion.

To fix a Non-FFV vehicle inadvertently fueled once with

E-85 perform the following:

•

Drain the fuel tank (see your authorized dealer).

•

Change the engine oil and oil filter.

•

Disconnect and reconnect the battery to reset the

engine controller memory.

More extensive repairs will be required for prolonged

exposure to E-85 fuel.

MMT In Gasoline

Methylcyclopentadienyl Manganese Tricarbonyl (MMT)

is a manganese-containing metallic additive that is

blended into some gasoline to increase octane. Gasoline

blended with MMT provides no performance advantage

beyond gasoline of the same octane number without

MMT. Gasoline blended with MMT reduces spark plug

life and reduces emissions system performance in some

vehicles. The manufacturer recommends that gasoline

482 STARTING AND OPERATING

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды

Dodge 2015 Journey, Руководство пользователя

Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды