Dodge 2015 Journey Скачать руководство пользователя страница 303

Страница: 303 / 648

Electronic Vehicle Information Center (EVIC) Display

The Electronic Vehicle Information Center (EVIC) fea-

tures a driver-interactive display that is located in the

instrument cluster. For further information, refer to

“Electronic Vehicle Information Center (EVIC)”.

9. Park/Headlight ON Indicator — If Equipped

This indicator will illuminate when the park

lights or headlights are turned on.

10. Tire Pressure Monitoring Telltale Light — If
Equipped

Each tire, including the spare (if provided),

should be checked monthly when cold and

inflated to the inflation pressure recommended

by the vehicle manufacturer on the vehicle

placard or tire inflation pressure label. (If your vehicle

has tires of a different size than the size indicated on the

vehicle placard or tire inflation pressure label, you should

determine the proper tire inflation pressure for those

tires.)
As an added safety feature, your vehicle has been

equipped with a Tire Pressure Monitoring System

(TPMS) that illuminates a low tire pressure telltale when

one or more of your tires is significantly under-inflated.

Accordingly, when the low tire pressure telltale illumi-

nates, you should stop and check your tires as soon as

possible, and inflate them to the proper pressure. Driving

on a significantly under-inflated tire causes the tire to

overheat and can lead to tire failure. Under-inflation also

reduces fuel efficiency and tire tread life, and may affect

the vehicle’s handling and stopping ability.
Please note that the TPMS is not a substitute for proper

tire maintenance, and it is the driver’s responsibility to

maintain correct tire pressure, even if under-inflation has

not reached the level to trigger illumination of the TPMS

low tire pressure telltale.

UNDERSTANDING YOUR INSTRUMENT PANEL 301

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды

Dodge 2015 Journey, Руководство пользователя

Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды