Dodge 2008 Dakota Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 439

Dodge 2008 Dakota Скачать руководство пользователя страница 72

Safety Checks You Should Make Inside The
Vehicle

Heater Defroster Ducts
Inspect the heater defroster ducts for proper operation.
Check for proper airflow through all defroster ducts. If
there is any question regarding the operation of your
heater defroster ducts, have the system checked by an
authorized dealer

Seat Belts
Inspect the seat belt system periodically, checking for
cuts, frays and loose parts. Damaged parts must be
replaced immediately. Do not disassemble or modify the
system.

Seat belt assemblies must be replaced after an accident if
they have been damaged (bent retractor, torn webbing,
etc.) or if the front airbags have deployed. If there is any
question regarding seat belt or retractor condition, re-
place the seat belt.

Airbag Light
The airbag light should come on, and remain on, for six
to eight seconds as a bulb check when the ignition switch
is first turned ON. If the light is not lit during starting, see
your authorized dealer. If the light stays on, flickers or
comes on while driving, have the system checked by an
authorized dealer. If there is a problem with the airbag
light, the seat belt light will flash.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

71

2

«
...
70
71
72
73
74
...
»

Содержание 2008 Dakota
























































































































































































































































































































































































































































Отзывы:

Нет отзывов