Dodge 2008 Dakota Скачать руководство пользователя страница 332 | Manualshive

Страница: 332 / 439

Dodge 2008 Dakota Скачать руководство пользователя страница 332

NOTE:

The winch mechanism is designed for use with

the jack extension tube only. Use of an air wrench or other
power tools is not recommended and can damage the
winch.

Tire Changing Procedure

WARNING!

Getting under a jacked-up vehicle is dangerous. The
vehicle could slip off the jack and fall on you. You
could be crushed. Never get any part of your body
under a vehicle that is on a jack. Never start or run
the engine while the vehicle is on a jack. If you need
to get under a raised vehicle, take it to a service center
where it can be raised on a lift.

Do not raise this vehicle using a bumper jack. The scissor
jack is designed as a tool for changing tires on this vehicle
only. It is not recommended that the jack be used for
service purposes or to lift more than one wheel at a time.

Spare Tire Stowage Location

WHAT TO DO IN EMERGENCIES

331

6

«
...
330
331
332
333
334
...
»

Содержание 2008 Dakota
























































































































































































































































































































































































































































Отзывы:

Нет отзывов