Docomo xperia XZS SO-03J, Инструкция по эксплуатации

Страница: 43 / 261

41
Before Using the Terminal
･
If the installation screen for the
terminal's driver software appears on
your PC, please wait a moment for the
installation to complete.
･
When "Install software" screen appears
on the terminal, tap [SKIP] or [CANCEL].
･
When the "Use USB to" confirmation
screen appears, tap [CANCEL].
3
When charging is complete,
remove the USB plug of the USB
cable A to C from the USB port of
PC and then remove the Type-C
plug horizontally from the
terminal.
❖
Note
･
Connect the USB cable A to C correctly. Wrong
connection may cause damage.
1
Press and hold
O
for at least 1
second.
･
The terminal vibrates and the lock
screen appears after a while.
･
When you first turn on the power and
"
ようこそ
(Welcome)" is displayed,
follow the onscreen instructions to
make initial settings (P.43).
2
Cancel the screen lock.
･
Canceling the screen lock (P.42).
❖
Information
･
If the notification LED flashes red multiple times or an
icon appears indicating that the battery is low when
you press
O
with the terminal powered off, the
battery is running low. Charge the terminal (P.36).
･
When SIM card lock (P.180) is set, enter PIN code on
the PIN code entry screen (P.180).
Turning power on/off
Turning power on