Docomo xperia XZS SO-03J, Инструкция по эксплуатации

Страница: 168 / 261

166
Settings
An access point for connecting to the
Internet (sp-mode) is already registered. You
can add or change it if necessary.
For details of sp-mode, refer to NTT DOCOMO
website.
https://www.nttdocomo.co.jp/service/
spmode/ (in Japanese only)
For using mopera U and Business mopera
Internet, add the access point manually.
For details on mopera U, refer to mopera U
website.
https://www.mopera.net/ (in Japanese only)
Checking the access point in use
1
From the Home screen,
u
[Settings]
u
[More]
u
[Mobile
networks]
u
[Access Point Names].
･
The radio button on the right of current
access point is marked.
Setting an access point additionally
1
From the Home screen,
u
[Settings]
u
[More]
u
[Mobile
networks]
u
[Access Point Names].
2
Tap .
･
To edit the access point, tap the access
point.
3
[Name]
u
Enter a name
u
[OK].
4
[APN] u Enter an access point name
u
[OK].
5
Tap and enter all other
information required by your
network operator.
6
u
[Save].
❖
Information
･
Do not change the MCC/MNC. If you change them to
the values other than the default (440/10), the access
point will not be displayed on the APN screen. If the
set access point is not displayed,
in Step 2 u Tap
[Reset to default] or , then set the access point
again.
･
It is recommended that you use the access point that
is registered by default as it is.
Initializing an access point
1
From the Home screen,
u
[Settings]
u
[More]
u
[Mobile
networks]
u
[Access Point Names].
2
u [Reset to default].
Setting an access point