Docomo Style L-03B, Инструкция по эксплуатации

Страница: 91 / 139

89
Others
Grant section at http://www.fcc.gov/oet/ea/fccid/ after search on
FCC ID BEJL03B.
For body worn operation, this phone has been tested and meets
the FCC RF exposure guidelines when used with an accessory
designated for this product or when used with an accessory that
contains no metal and that positions the handset a minimum of
2.5 cm from the body.
*
In the United States, the SAR limit for wireless mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. SAR values may vary depending upon
national reporting requirements and the network band.
Declaration of Conformity
The product “L-03B” is declared to conform with the essential
requirements of European Union Directive 1999/5/EC Radio and
Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and
3.2.
This mobile phone complies with the EU requirements for exposure to
radio waves.
Your mobile phone is a radio transceiver, designed and manufactured
not to exceed the SAR* limits** for exposure to radio-frequency (RF)
energy, which SAR* value, when tested for compliance against the
standard was
0.880
W/kg. While there may be differences between the
SAR* levels of various phones and at various positions, they all meet***
the EU requirements for RF exposure.
*
**
***
The exposure standard for mobile phones employs a unit
of measurement known as the Specifi c Absorption Rate, or
SAR.
The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of tissue,
recommended by The Council of the European Union. The
limit incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
Tests for SAR have been conducted using standard
operating positions with the phone transmitting at its highest
certifi ed power level in all tested frequency bands. Although
the SAR is determined at the highest certifi ed power level,
the actual SAR level of the phone while operating can be
well below the maximum value. This is because the phone
is designed to operate at multiple power levels so as to use
only the power required to reach the network. In general, the
closer you are to a base station antenna, the lower the power
output.