Docomo Style L-03B, Инструкция по эксплуатации

Страница: 131 / 139

32
AT Commands Overview Parameters/Descriptions
Command
Examples
ATD Set automatic dialing Input format :
ATD*99***<cid>#
cid: Enter from 1 to 11 for the
registration number (cid) of the
APN set with the +CGDCONT
command.
• If cid is omitted and
"ATD*99***#" is entered, the
APN registered to cid1 is
dialed automatically.
ATD*99***3#
CONNECT
ATE<n> Specify whether there is
echo back for DTE in the
command mode. n=0 : No echo back
n=1 : Echo back (default) ATE1
OK
ATH Disconnect the
line during packet
communication. − (During packet
communication)
ATH
NO CARRIER
ATI<n> Display the confi rmation
code. n=0 : Display "NTT DOCOMO".
n=1 : Display the product
name.
n=2 : Display the version of
the FOMA terminal.
n=3 : Display each element of
the ACMP signal.
n=4 : Display details of the
communication functions
of the FOMA terminal.
ATI0
NTT DOCOMO
OK
ATI1
FOMA L03B
OK
ATQ<n> Set whether to display
the result code for DTE. n=0 : Show (default)
n=1 : Hide ATQ0
OK
ATQ1
("OK" is not
displayed at this
time)
ATS3=<n> Set the carriage return
character. n=13 : Default value (only "13"
can be specifi ed)
ATS3? : Display the current
setting values.
ATS3=13
OK
ATS3?
013
OK
ATS4=<n> Set the line feed
character. n=10 : Default value (only "10"
can be specifi ed)
ATS4? : Display the current
setting values.
ATS4=10
OK
ATS4?
010
OK
ATS5=<n> Set the back space
character. n=8 : Default value (only "8"
can be specifi ed)
ATS5? : Display the current
setting values.
ATS5=8
OK
ATS5?
008
OK
ATV<n> Set all result codes
to be displayed in
numeric or alphabetic
characters. n=0 : Display result codes in
numeric values.
n=1 : Display result codes in
text (default).
ATV1
OK
Continue on the next page