Docomo P-06b, Инструкция по эксплуатации

Страница: 95 / 171

93
Other
s
The usable time of the battery is short.
…
Make sure not to leave the FOMA terminal out-of-service-area for
a long time. If your FOMA terminal is left out-of-service area, it
searches for radio waves to establish communications, consuming
more power.
…
The usable time of the battery pack varies depending on the
usage environment or its remaining life.
…
Battery packs are consumables. The usable time slightly shortens
each time you charge the battery. If the usable time becomes
extremely short as compared with the default state even if fully
charged, purchase the specifi ed battery pack.
The power of the FOMA terminal shuts down and restarts.
…
If the terminal of the battery pack is stained, the connection might
deteriorate to shut down the power. Wipe the battery terminal with
a dry cotton swab, etc.
Pressing keys is disabled.
…
Make sure Dial Lock is deactivated. (See page 45)
…
Make sure Keypad Lock is deactivated.
…
Make sure Side Key Guard is set to “OFF”.
The UIM is not recognized.
…
Make sure you insert the UIM in the correct direction. (See page 23)
Call
Cannot make a call by pressing numeric keys.
…
Make sure Restrict Dialing is deactivated.
…
Make sure the lock for “Keypad dial” in Original Lock is released.
(See page 46)
…
Make sure Dial Lock is deactivated. (See page 45)
…
Make sure Self Mode is deactivated. (See page 46)
Cannot talk.
(“
” does not disappear even if you move to another place.
You cannot make or receive a call, though the radio wave
conditions are not bad.)
…
Turn off and on the FOMA terminal, or remove and attach/insert
the battery pack or UIM. (See page 23, page 25)
…
Depending on the radio wave property, you may not be able to
make or receive a call even if the FOMA terminal is “within service
area” or “
” is displayed for a radio wave condition. Move to
another place and redial.
…
Make sure the call restrictions such as Call Rejection, Call
Acceptance, etc. are deactivated.
…
Depending on the radio wave congestion state, calls and mail
messages may be congested and hard to be connected in
crowded places. In that case, the message “Please wait” or “Please
wait for a while” is displayed and a busy tone sounds. Move to
another place or wait for a while, and then redial.
Osaifu-Keitai
Cannot use Osaifu-Keitai function.
…
If you remove the battery pack or activate Omakase Lock, the IC
card function becomes unavailable regardless of the setting of IC
Card Lock. (See page 23, page 46)
…
Make sure IC Card Lock is deactivated. (See page 45)
…
Make sure you place the f mark on the FOMA terminal over
the scanning device. (See page 81)