Docomo P-06b, Инструкция по эксплуатации

Страница: 162 / 171

42
ATIn
[AT][M]
Displays the ID code. n=0: Displays “NTT DoCoMo”.
n=1: Displays the product name. (same as +GMM)
n=2: Displays the version of the FOMA terminal. (same
as +GMR)
n=3: Displays ACMP information element.
n=4: Displays the details of the function available for
communication on the FOMA terminal.
ATI0
NTT DoCoMo
OK
ATI1
FOMA P06B
OK
ATOn
[M]
Returns from the online command
mode to the online data mode
during communication. n=0: Returns from the online command mode to the
online data mode. (can be omitted)
ATO
CONNECT
ATQn
[M]
[&F][&W]
Sets whether the result code is to
be displayed for the DTE. n=0: Displays the result code. (default)
n=1: Does not display the result code. ATQ0
OK
ATQ1
(“OK” is not returned at this
time.)
ATS0=n
[M]
[&F][&W]
Sets the number of rings
required until the FOMA terminal
automatically receives an
incoming call. n=0: Does not automatically receive an incoming call.
(default)
n=1 to 255: Automatically receives an incoming call with
the specified number of rings.
(when n
≧
10, does not automatically receive a packet
(PPP) incoming call, then the line is disconnected after
about 30 seconds.)
ATS0?: Inquires the set value.
ATS0=0
OK
ATS0?
000
OK
ATS2=n
[M]
[&F]
Sets the escape character. n=43: Default
n=127: Makes escape processing invalid.
ATS2?: Inquires the set value.
ATS2=43
OK
ATS2?
043
OK
ATS3=n
[M]
[&F]
Sets the carriage return (CR)
character. n=13: Default (n=13 only specifiable)
ATS3?: Inquires the set value.
ATS3=13
OK
ATS3?
013
OK
ATS4=n
[M]
[&F]
Sets the line feed (LF) character. n=10: Default (n=10 only specifiable)
ATS4?: Inquires the set value.
ATS4=10
OK
ATS4?
010
OK
ATS5=n
[M]
[&F]
Sets the back space (BS)
character. n=8: Default (n=8 only specifiable)
ATS5?: Inquires the set value.
ATS5=8
OK
ATS5?
008
OK
ATS30=n
[M][&F]
Sets the inactive timer (minute).
When no user data is sent or
received, the connection is cut
after the set time has elapsed.
This command is for only 64K data
communication. When 0 is set, the
inactive timer turns to OFF. n=0 to 255 (default=0) (unit: minute) ATS30=0
OK
ATS103=n
[M][&F]
Selects characters to pause for
incoming sub-address. n=0:
¢
(asterisk)
n=1: / (slash) (default)
n=2: ¥ or back slash
ATS103=0
OK
ATS104=n
[M][&F]
Selects characters to pause for
outgoing sub-address. n=0: # (sharp)
n=1: % (percentage) (default)
n=2: & (and) ATS104=0
OK
ATVn
[M]
[&F][&W] Sets all the result codes in the
numeric or alphabetical notation. n=0: Returns the result code in a numeric value.
n=1: Returns the result code in alphabetical characters.
(default)
ATV1
OK
ATXn
[M]
[&F][&W]
Sets whether to display the
speed in the CONNECT display
at connection.
Detects busy tone and dial tone. n=0: Dial tone not detected; busy tone not detected;
speed not displayed.
n=1: Dial tone not detected; busy tone not detected;
speed displayed.
n=2: Dial tone detected; busy tone not detected; speed
displayed.
n=3: Dial tone not detected; busy tone detected; speed
displayed.
n=4: Dial tone detected; busy tone detected; speed
displayed. (default)
ATX1
OK
AT command Outline Parameter/Explanation
Command execution
example
Continued to Next Pa g e