Docomo P-06b, Инструкция по эксплуатации

Страница: 161 / 171

41
AT+CREG=n
[AT][M]
[&F][&W]
Sets whether the result is
displayed about the inside and
outside of the service area. n=0: Not notified. (default)
n=1: Notified at switching between the inside and
outside of the service area.
(Inquiry)
AT+CREG?
+CREG: <n>,<stat>
n: Set value
stat:
0: Outside voice call area
1: Inside voice call area
4: Unknown
5: Inside voice call area (during roaming)
AT+CREG=1
OK
(set to “Notified”)
AT+CREG?
+CREG: 1,0
OK
(means the outside of the service
area)
(when moved from the outside to
the inside of the service area)
+CREG: 1
AT+CUSD=n,“<str>”,0
[M]
[&F][&W]
Sets or checks the additional
service for network. n=0: Does not display mid result. (default)
n=1: Displays mid result.
<str>: Service code
Mid result: m,”<str>”,0
m=0: Shows the setting is completed.
m=1: Shows the network requires the information. AT+CUSD=0,
OK
AT+CUSD=1,“
*
148
*
1
*
0000#”,0
+CUSD:0,“148
*
7#”,0
OK
AT+FCLASS=n
[M]
[&F][&W]
Sets communication class
in the FOMA terminal. n=0: Data communication (default) AT+FCLASS=0
OK
AT+GCAP
[M]
Displays the AT command
supported by FOMA terminal. GCAP: n
n=+CGSM: Some or all GSM commands are supported.
n=+FCLASS: +FCLASS command is supported.
n=+W: +W command is supported. AT+GCAP
+GCAP:+CGSM,+W
OK
AT+GMI
[M]
Displays the manufacturer name
(Panasonic).
−
AT+GMI
Panasonic
OK
AT+GMM
[M]
Displays the product name
(FOMA P-06B) of the FOMA
terminal.
−
AT+GMM
FOMA P06B
OK
AT+GMR
[M]
Displays the version of the
FOMA terminal.
−
AT+GMR
Ver1.00
OK
AT+IFC=n,m
[M]
[&F][&W]
Selects the flow control method. n: DCE by DTE
m: DTE by DCE
0: No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control
Default: n, m = 2.2
AT+IFC?: Inquires the set value.
AT+IFC=2,2
OK
AT+WS46=n
[M]
Selects the wireless
communication network of the
FOMA terminal. Returns “ERROR” for the mode setting because the
wireless communication network is not selected on the
FOMA terminal by this command.
n=12: GSM/GPRS
n=22: W-CDMA (Wideband CDMA)
n=25: Automatic AT+WS46=22
ERROR
AT+WS46?
25
OK
ATA
[AT][M]
Performs the receiving process
in the mode when the FOMA
terminal received the incoming
call.
−
RING
ATA
CONNECT
ATD
[AT][M]
Performs the automatic outgoing
process to the FOMA terminal
according to the contents
specified in the parameter and
dial parameter. <cid>: 1 to 10. Displays the APN defined by
+CGDCONT.
When calling cid1, you can omit the phone number like
“ATD
¢
99
¢¢¢
#.”
ATD
¢
99
¢¢¢
1#
CONNECT
ATEn
[AT][M]
[&F][&W] Sets whether echo-back is
issued to the DTE in the
command mode. n=0: Issues no echo-back.
n=1: Issues echo-back. (default) ATE1
OK
ATHn
[AT][M]
Places the FOMA terminal into
the on-hook state. n=0: Disconnects the line. (can be omitted) (During packet communication)
+++
ATH
NO CARRIER
AT command Outline Parameter/Explanation
Command execution
example
Continued to Next Pa g e