Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 556 / 577

39
1
“ [ スタート (Start)]”
1
Open “ 接続先 (Access point)”.
2
Select the icon which is communicating, then
click “ 切断 (Disconnect)”
1
Click “ 閉じる (Close)”.
Before uninstalling the “FOMA PC setup software”,
reset the contents modified for the FOMA phone to the
default.
1
Exit the currently running programs.
≥
Click “ 終了 (Exit)” at the bottom right to exit the “FOMA PC setup
software”.
≥
If you try to uninstall during running of the “FOMA PC setup
software”, the display below appears. Stop the uninstallation
processing, and exit the program.
Information
≥
Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the FOMA communication setup files (driver).
≥
The power consumption of the FOMA phone increases during
communication.
≥
During packet communication, the communication state appears on the
FOMA phone.
“ ” (Communicating, data sending)
“ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving)
“ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
≥
During 64K data communication, “ ” appears on the FOMA phone.
Disconnecting
Information
≥
The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
≥
The baud rate displayed on your personal computer may be different
from the actual one.
Uninstalling FOMA PC Setup Software
Before Uninstalling
The displays differ depending on the personal computer
you use.
≥
Operate as the user who has the PC administrator right.
1
“ [ スタート (Start)]”
1
“ コントロールパネ
ル (Control panel)”
1
Open “ プログラムのアン
インストール (Uninstall programs)”.
2
Select “NTT DoCoMo FOMA PC 設定ソフト
(NTT DoCoMo FOMA PC setup software)”,
then click “ アンインストール (Uninstall)”
1
Click “ 続行 (Continue)”.
3
Click “
はい
(Yes)”.
The uninstallation starts, and applications (programs) are deleted.
4
Click “ 完了 (Finish)”.
Uninstalling the “FOMA PC setup software” is completed.
The operation below explains how to set an access
point name (APN) for packet communication.
The FOMA packet communication does not use an
ordinary phone number as an access point unlike the
64K data communication. For each access point,
register an access point name (APN) in the FOMA phone
beforehand, then specify the registration number (cid) in
the access point phone number field for connection.
“cid” is the abbreviation of “Context Identifier”, the
number for storing the packet communication access
point name (APN) in the FOMA phone.
1
Start the “FOMA PC 設定ソフト (FOMA PC
setup software)”, then click “ 接続先 (APN) 設
定 [Access point name (APN) setting]” in “ マ
ニュアル設定 (Manual setup)”.
2
Click “OK”.
When you click “OK”, the system automatically accesses the
connected FOMA phone and reads the registered “access point
name (APN) setting”. You can obtain the setting information also
from “
ファイル (File)” → “FOMA 端末から設定を取得 (Obtain the
setting from the FOMA phone)” on the menu in step 3.
Uninstall
Access Point Name (APN) Setting