Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 548 / 577

31
The following drivers are installed by installation of the
“FOMA communication setup files” (driver):
When uninstalling the “FOMA communication setup
files” (driver) is necessary (such as when upgrading the
version), perform the operation below.
≥
Operate as the user who has the PC administrator right.
1
If the FOMA phone is connected to a personal
computer via the FOMA USB Cable with
Charge Function 01/02 (option), disconnect
the FOMA USB Cable with Charge Function
01/02.
2
“ [
スタート
(Start)]”
1
“
コントロールパネ
ル
(Control panel)”
1
Open “
プログラムのアン
インストール
(Uninstall programs)”.
3
Select “FOMA P706ie USB” and click “
アンイ
ンストールと変更
(Uninstall and change)”
1
Click “
続行
(Continue)”.
4
Click “OK”.
5
Click “ はい (Yes)” to restart Windows.
The uninstallation is then completed.
≥
If you click “ いいえ (No)”, restart it manually.
Device name
FOMA communication setup file
(driver) name
ポート
(COM
と
LPT) [Port (COM/
LPT)]
･
FOMA P706ie Command Port
･ FOMA P706ie OBEX Port
モデム (Modem) ･ FOMA P706ie
ユニバーサル シリアル バス コン
トローラ
(Universal serial bus
controller)
･ FOMA P706ie
To set an access point with the “FOMA PC setup software”, see page 32.
To set an access point without the “FOMA PC setup software”, see
page 40 or page 44.
Uninstall FOMA Communication Setup
Files (Driver)
Information
≥
If you remove the FOMA USB Cable with Charge Function 01/02 from
the personal computer while installing the “FOMA communication setup
files” (driver) or click the “
キャンセル (Cancel)” button to stop
installation, the “FOMA communication setup files” (driver) may not be
installed correctly. In this case, open “P706ie_USB_Driver”
→ “Drivers”
→ “WinVista32” inside “FOMA P706ie CD-ROM”, and execute
“p706ieun.exe” to delete the “FOMA communication setup files” (driver),
and then install the files again.
To connect the FOMA phone to a personal computer
and perform the packet communication or 64K data
communication, you need to configure various settings
related to the communication. Using the “FOMA PC
setup software”, you can easily carry out the settings
below. If required, you can set the packet
communication and 64K data communication without
using the “FOMA PC setup software”. (See page 40 and
page 44)
FOMA PC Setup Software
■ Easy setting
You can easily carry out “dial-up creation for FOMA data communication”
by following the guidance.
■
Access point name (APN) setting
You can set an access point name (APN) required for packet
communication.
The FOMA packet communication does not use an ordinary phone
number as an access point unlike the 64K data communication.
You need to register an access point name (APN) in the FOMA phone in
advance, and specify the registration number (cid) in the access point
number field for connection.
By the default, “mopera.ne.jp”, the access point name (APN) of “mopera”,
is registered in cid
※
1, and “mopera.net”, that of “mopera U”, is registered
in cid
※
3. To connect to another service provider or Intranet LAN,
however, you need to set the access point name (APN).
※ “cid” is the abbreviation of “Context Identifier”, the number for storing
the packet communication access point (APN) to the FOMA phone.
Information
≥
If the old-version “FOMA
データ通信設定ソフト
(FOMA data
communication setup software)” or the older version than this “FOMA
PC
設定ソフト (FOMA PC setup software)” (older than version 4.0.0) is
installed, uninstall it in advance.