Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 528 / 577

11
3
Select “ 『 mopera U 』への接続 (Connect to
mopera U)” or “ 『 mopera 』への接続 (Connect
to mopera)”, then click “
次へ
(Next)”.
To use “mopera U”, select “ 『 mopera U 』への接続 (Connect to
mopera U)”. To use “mopera”, select “
『
mopera
』への接続
(Connect
to mopera)”.
When “
『 mopera U 』への接続 (Connect to mopera U)” is selected,
the confirmation display appears asking whether you have signed up
for it. If you have signed up, click “
はい (YES)”.
≥
See page 11 for using a provider other than “mopera U” or
“mopera”.
4
Click “OK”.
≥
The system obtains the access point name (APN) setting from the
FOMA phone connected to the personal computer. Wait for a while.
5
Enter an access point name, then click “
次へ
(Next)”.
You can specify any name for the currently created connection.
Enter a plain name in the “
接続名
(Connection name)” field.
≥
You cannot enter the following half-pitch characters:
¥, /, :,
¢
, ?, !, <, >, |, and ”.
≥
For the setting of “
発信者番号通知
(caller ID notification)”, select
“ 設定しない（推奨） [Not set (recommended)]” for overseas use.
≥
“mopera U” supports connection types of both “ PPP接続 (PPP
connection)” and “
IP接続
(IP connection)”. For overseas use,
select “ IP接続 (IP connection)”.
6
Click “
次へ
(Next)”.
If the access point is “mopera U” or “mopera”, you can connect even
if the “
ユーザ名
(user name)” and “
パスワード
(password)” fields are
blank.
≥
Select a user optionally.
7
Put a check mark for “
最適化を行う
(Optimize)”, then click “
次へ
(Next)”.
The confirmation display appears asking whether to optimize all the
communication settings for the FOMA HIGH-SPEED compatible
terminal, then click “
はい
(Yes)”.
≥
If optimized already, the confirmation display to optimize does not
appear.
8
Confirm the set information, then click “
完了
(Complete)”.
The set contents are listed on the display. Confirm that there is no
problem on the set contents, then click “
完了 (Complete)”.
≥
To change the set contents, click “
戻る
(Back)”.
≥
If “ デスクトップにダイヤルアップのショートカットを作成する
(Create a dial-up shortcut on the desktop)” is checked, a dial-up
shortcut will be created on the desktop.
9
Click “OK”.
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 14)
≥
To make the optimization valid, you need to restart the personal
computer.
The packet communication is a communication system
you are charged according to the amount of data you
sent and received, regardless of the communication
time and distance. (Maximum download speed: 3.6
Mbps, Maximum upload speed: 384 kbps)
To use a provider other than “mopera”, you may need to
separately apply for the service and sign a contract with
the provider.
1
Click “
かんたん設定
(Easy Setting)”.
2
Select “ パケット通信（ HIGH-SPEED 対応端末）
(Packet communication (HIGH-SPEED
compatible terminal))”, then click “
次へ
(Next)”.
Confirm that “
パケット通信（
HIGH-SPEED
対応端末）
(Packet
communication (HIGH-SPEED compatible terminal))” is checked,
then click “
次へ (Next)”.
3
Select “
その他
(Others)”, then click “
次へ
(Next)”.
Confirm that “
その他
(Others)” is checked, then click “
次へ
(Next)”.
4
Click “OK”.
≥
The system obtains the access point name (APN) setting from the
FOMA phone connected to the personal computer. Wait for a
while.
Using a provider other than “mopera U” or
“mopera” as an access point