Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 267 / 577

265
1Seg
≥
If you move, the receivable airwaves or broadcasting stations might change being
affected by mountains or buildings. If reception on 1Seg goes bad after moving,
perform “Auto channel setting”; then reception might be improved via different
airwaves or you might be able to watch programs of other broadcasting stations.
≥
If you use Channel Search to select channels after you move, etc., you might find the
channels you could not store by “Auto channel setting”. Execute “Add to ch. list” to
store the channels you found, and then you can watch the channel from the next time.
≥
When starting 1Seg or switching channels, it takes a while before you can watch a
1Seg program.
Function Menu of Viewer Display
Information
Function menu Operation/Explanation
Channel info You can display the detailed display of the selected channel list.
Select a broadcasting station to switch to it.
Program info You can display information of the program you are watching.
Channel list Go to step 1 of “Select Channel List” on page 262.
Channel setting See page 261.
Add to ch. list You can add the broadcasting station you are currently watching
to the channel list.
1
YES
≥
The broadcasting station is stored in the lowest number of an
unoccupied remote-control number from 13 onward.
Program guide See page 268.
Switch display You can switch the contents of the viewer display.
1
Select an item.
≥
If you set to “Enlarged V. img+DBC”, the video on the vertical
display is enlarged. However, the sides of the video might be
cut depending on the program.
≥
Even if you set to “Data broadcasting”, the audio from 1Seg
programs is output.
At 1Seg start-up
When “Caption” is
set to “ON”:
V. img+D
BC
When “Caption” is
set to “OFF”:
Visual image+DBC
Switch TV/data BC You can switch between Video Mode and Data Broadcasting
Mode while watching a 1Seg program on the vertical display.
Icon See page 277.
Mail ticker disp. See page 277.
Compose message See page 267.
Settings
(Off timer) When the specified time elapses, the confirmation display
appears asking whether to end watching or recording a program
(except for Timer Recording).
1
Select a time.
Settings
(Brightness) You can set the brightness of the display light to Level 1 (dark)
through 5 (bright).
1
Select a brightness level.
≥
If you set to “Auto setting”, it is adjusted automatically in
accordance with the ambient brightness sensed by the light
sensor.
≥
The setting here is valid until you finish watching the 1Seg
program. The setting at 1Seg start-up follows the setting
specified by “Brightness” of “Backlight” on page 101.
Settings
(Mobile W-Speed) See page 276.
Settings
(Image quality) See page 276.
Settings
(LCD AI) See page 102.
Settings
(Auto volume) See page 276.
Settings
(Remaster) See page 276.
Function menu Operation/Explanation
At 1Seg start-up
Video Mode
At 1Seg start-up
OFF