Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 146 / 577

144
Ca
mer
a
Movie type set
[Movie Mode only]
You can select whether to record both the video and voice, or one
of them when you shoot the moving image.
1
Normal, Video, or Voice
Display size You can set whether to display a moving image or still image in
the original size (Actual size) or to fit to the screen size on the
Finder display.
1
Actual size or Fit in display
Common replay
mode
[Movie Mode only]
You can set a shooting size appropriate for attaching to i-mode
mail.
1
YES
≥
Image Size is set to “QCIF”, File Size Setting is set to “Mail
restrict’n (S)”, and Image Quality (Movie Mode) is set to
“Normal”.
Icon You can set whether to display icons.
1
ON or OFF
Memory info You can display the used memory space (estimate)/number of
stored items.
Function menu Operation/Explanation
At Camera start-up
Normal
Information
<File size setting>
≥
When “File size setting” is set to “Long time”, “Store in” is set to “microSD”.
<Camera settings>
≥
Note that the image may blur in Night Mode because the exposure takes a longer
time.
≥
If you set “Flicker correction” to “Auto”, it may take a while to automatically adjust the
image quality. In this case, switch to Mode 1 or Mode 2 according to the power
frequency provided in the shooting location.
≥
Even if you change the setting of “Brightness”, “White balance”, “Color mode set”, or
“Focus”, the setting appropriate for each “Photo mode” applies when you change
“Photo mode”.
<Storage setting>
≥
See “Select storage” for how to set a storage location on the microSD card.
≥
If you change “File size setting” to “Long time”, “Store in” is set to “microSD” and
“Storage setting” cannot be operated.
≥
When “Auto save set” is set to “ON”, the image is saved to the latest folder if “Select
storage” is not set or the folder set as a destination folder is deleted.
<Img. stabilizer>
≥
This function is only for decreasing the degree of camera shake, so its effect differs
depending on the subject or condition.
≥
Image Stabilizer might not work effectively in the following cases:
・
When the camera shakes to a great extent
・ When zooming is in use
・ When shooting moving subjects
≥
When “Photo mode” of “Camera settings” is set to “Sports” or “Night mode”, “Img.
stabilizer” becomes invalid.
≥
Residual images might remain in the area where the subject is moving, or noise might
be found in overall area. In that case, set this function to “OFF”.
≥
When this function is activated, the processing after shooting might be about two
seconds longer due to the processing by Image Stabilizer.
<Shooting effect>
≥
When “Image size” is set to larger than “VGA (640 x 480)”, you cannot shoot with a
frame.
≥
You cannot save the still image shot with a frame as the mirrored image.
≥
When “Image size” is set to larger than “VGA (640 x 480)”, you cannot paste cushy
marks in Photo Mode.
<Cont. shooting set.>
≥
The number of shots that can be set differs depending on the image size. The number
of shots that can be set is as follows:
VGA (640 x 480): 4
CIF (352 x 288): 4
QVGA (240 x 320): 5 through 10
QCIF (176 x 144): 5 through 20
Sub-QCIF (128 x 96): 5 through 20
Information