Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 104 / 577

102
So
un
d/
Scre
en/
L
ig
h
t S
e
tt
in
g
s
Press and hold
5
for at least one second.
≥
While a Decome-Anime message is displayed, an i-
α
ppli program is running, or a
Flash movie is displayed, you cannot switch the backlight on/off by pressing and
holding
5
for at least one second.
Charging
1
Standard or Constant light
Standard . . . . . . . . Lights during charging in the same setting
as it lights in ordinary time.
Constant light . . . . Always lights during battery charge.
Area You can set the range the backlight lights in.
1
LCD+Keys or LCD
Brightness You can adjust the brightness of the backlight for the display to
Level 1 (dark) through Level 5 (bright).
1
Select a brightness level.
≥
When “Auto setting” is set, the backlight set by “Area” is
automatically adjusted according to the ambient brightness that
has been detected by the light sensor.
Soft light You can set whether to light the backlight softly for the display.
1
ON or OFF
≥
Even if you set to “OFF”, the backlight might light softly for some
functions.
To switch the backlight on/off by pressing one key
Item Operation/Explanation
Information
≥
When “Lighting” is set to “ON”, the backlight stays lit while a call is coming in and the
area specified by “Area” lights for about 15 seconds when you turn on the power,
touch the keys, or open the FOMA phone. The backlight stays lit while the camera is
activated or a moving image/i-motion movie is played back. When “OFF” is set, it does
not light. However, it stays lit during recording of a moving image regardless of the
“Lighting” setting.
≥
See page 74 for Backlight during a videophone call.
≥
See page 277 for Backlight for while watching a 1Seg program.
≥
If the power is supplied from external power sources such as an AC adapter (option),
the setting for “Charging” applies, regardless of the on/off setting of the backlight for
“Lighting”.
≥
When you display the text of i-mode mail or Messages R/F, the lighting time varies
according to the length of the text.
You can set whether to automatically adjust the brightness of the display
backlight and to compensate the image quality according to that brightness
during playback of i-motion movies, Music&Video Channel programs, or
video files, during a videophone call, or while watching a 1Seg program.
1
m 1
Settings
1
Display
1
LCD AI
1
ON or OFF
≥
If you operate the setting from the Function menu during a videophone call or
watching a 1Seg program, the setting is effective only for the current videophone
call or 1Seg program.
You can adjust the contrast of the display so that it is hardly viewed from
a slanted angle.
1
m 1
Settings
1
Display
1
View blind
1
ON or OFF
1
Select a contrast.
≥
You can set the contrast to Level 1 through Level 3. It is the most difficult to view in Level 3.
≥
If “Power saver mode” is set to “ON” and the specified time elapses without doing any
operations from the Stand-by display or the voice call talking display, the FOMA
phone switches to Power Saver Mode and the display goes off.
≥
When an image other than still image is set for the Stand-by display, the Stand-by display
shifts to Power Saver Mode after the image is played back and a standby time elapses.
≥
The FOMA phone does not switch to Power Saver Mode during data communication
or charging, or while the i-
α
ppli Stand-by display is running.
≥
The display appears when you operate the FOMA phone, receive a call, or receive
i-Channel tickers. However, the receiving display does not appear when you receive a
call in Public Mode (Drive Mode).
<LCD AI>
Adjusting Quality of Display Automatically
Information
Information
≥
If you set to “ON”, the brightness is adjusted within the level specified for “Brightness”
of “Backlight”. The brightness is adjusted also while you are selecting a menu item.
≥
This function is disabled during Play Background.
<View Blind>
Making Display Hard to See from People
Around