Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 100 / 577

98
So
un
d/
Scre
en/
L
ig
h
t S
e
tt
in
g
s
You can select from among standard “Manner mode” to inform you of
incoming calls or mail by the vibrator, “Super silent” to erase sounds
including confirmation tones from the earpiece, or “Original” to
customize operations.
1
m 1
Settings
1
Incoming call
1
Manner mode set
1
Manner mode, Super silent or Original
1
Do the following operations.
Item Operation/Explanation
Record msg.
1
ON or OFF
≥
Even if you select “ON”, the ring time is fixed to about 13
seconds and cannot be changed when “Record message
setting” on page 69 is set to “OFF”.
≥
See page 69 for Record Message Setting.
Vibrator You can set the FOMA phone to vibrate for incoming calls and
mail.
1
ON or OFF
≥
See page 93 for Vibrator.
Phone vol. You can adjust the ring volume for incoming voice calls and
videophone calls.
1
Use
B o
to adjust the volume.
≥
See page 65 for Ring Volume.
Mail vol. You can adjust the ring volume for i-mode mail, SMS messages,
and Messages R/F.
1
Use
B o
to adjust the volume.
≥
See page 65 for Ring Volume.
Alarm vol. 1
Use
B o
to adjust the volume.
≥
See page 360 for Alarm.
VM tone You can set the FOMA phone to sound a confirmation tone when
a record message is played back, a voice memo is recorded or
played back, and a movie memo is recorded.
1
ON or OFF
Keypad sound
1
ON or OFF
≥
See page 94 for Keypad Sound.
Mic sensitiv.
1
Normal or Up
2
Press
l
( ).
You can set an image for the Stand-by display. You can set also i-motion
movies shot by the FOMA phone or downloaded from sites for the
Stand-by display.
1
m
1
Settings
1
Display
1
Display setting
1
Stand-by display
1
Select a type of image.
≥
If you select “Calendar/schedule”, select a display format, and then select “BG
image ON” or “BG image OFF”. If you select “BG image OFF”, the setting is
completed.
≥
If you select “
i α
ppli display”, select an i-
α
ppli program. The setting is completed.
2
Select a folder
1
Select an image.
≥
On the Stand-by display, the image smaller than the display is shown in
equivalent dimensions or enlarged to fit to the display size, depending on the
image size.
≥
See page 167 when you select “i-mode srch”.
LVA tone
1
ON or OFF
≥
See page 43 for LVA Tone (low battery alarm).
Item Operation/Explanation
+ m - 5 - 6
<Display Setting>
Changing Displays
Set Stand-by Display