Docomo FOMA D905I, Руководство пользователя, Страница: 400 / 513

398 Overseas Use
1
0
(for over a second)
z 81 z
Enter
90XXXXXXXX or 80XXXXXXXX
2
n
(for a voice call) or
t
(for a videophone
call)
1
Enter 90XXXXXXXX or 80XXXXXXXX
z m2
■
Making a videophone call:
Call type
field
z
2
2
Intn’l call
field
z 2
3
Country code
field
z
+
81
日本 (Japan)
4
m z
Yes
INFORMATION
●
You can also use the phonebook to make a call.
Receiving calls
You can receive calls with the same procedure as that
used in Japan.
1
A call arrives
z n
･
You can also press
t
to receive a videophone
call.
■ Receiving a videophone call with the
substitute image:
a
Have the other party enter your phone number to make
a call, as in Japan.
1 Dial 090XXXXXXXX or 080XXXXXXXX
Have the other party make a call by entering the
international access code for the originating country
and 81 as the country code for Japan, followed by your
phone number (a zero (0) omitted).
1 Enter the international access number for the
originating country
z
81
z
Dial 90XXXXXXXX
or 80XXXXXXXX
INFORMATION
●
When there is an incoming call during international
roaming, the call is received as an international call from
Japan. The caller is charged for a call to Japan and the
receiver is charged for an international call.
Setting the procedure for searching service
providers
Network Search Mode
When the current network of the service provider is out
of the service area, this function sets to automatically
search for a network and reconnect to another service
provider.
･
The setting may not be set depending on the signal
condition or the situation of networks.
･
As of October, 2007, service providers other than
NTT DoCoMo cannot be selected in Japan.
･
In case of out of service area after returning to Japan,
please confirm that Network Search Mode is set to
Auto
.
1
m z
Settings & NW services
z 91
1 z 1
-
3
Auto
: The setting is automatically made to a
connectable network.
Manual
: A list of connectable networks is
displayed. Select the connection destination.
･
To search for a network again:
m
on the
network list
Network re-search
: Searches for a connectable
network again.
･
When
Auto
is set, you are automatically
connected to the network.
･
When
Manual
is set, a list of connectable
networks is displayed. Select the connection
destination.
Setting a service provider to be connected
with priority
PLMN Setting
When Network Search Mode is set to
Auto
, this
function adds service providers and sets priority of a
service provider that is to be connected.
･
Priority may not be given to the service providers as
the priority set by this function depending on the
signal condition or the network situation.
･
The service providers are registered as a priority
network list designated by DoCoMo. Any service
providers that is already registered by the same kind
of network and the operator code cannot be
registered.
･
Up to 20 service providers can be registered.
Using “+” to make calls
Using Call Option to make calls
Having the other party make a call from Japan
Having the other party make a call from a country
other than Japan
Registering the service providers