Docomo FOMA D905I, Руководство пользователя, Страница: 145 / 513

143 Camera
･ Sensitivity up
,
Super sensitivity up
,
Color reversal
,
Painting
, and
Woodcut
settings are unavailable during
the in-camera shooting.
･ Night
cannot be set with the automatic continuous
shooting or automatic four-frame shooting.
･
In
Night
mode, color is captured more precisely;
However, due to the camera characteristics, there
may be noise (such as lines) in the image when
shootings are done in a low-light situation.
･
In
Sport
or
Pet
mode, shoot in a sufficient-light
situation. There may be noise in the images shot in a
room or a low-light situation.
･
In
Gourmet
or
Letter
mode, use the Macro mode
when shooting from a close range.
･
To select a mode while viewing the description of
each mode: Press
m1
on the still image
shooting screen or movie recording screen.
:
+2
:
+1
:
±
0
(Default)
: -
1
: -
2
･
If you change the level, it may not give much effect
depending on the object.
･
You cannot change the setting depending on the
scene mode/effect.
Natural color tone coordinated with the light source is
provided for shooting.
･
You cannot change the setting depending on the
scene mode/effect.
You can select frames saved in the FOMA terminal or
frame images downloaded from sites.
: Frame is set : Frame is canceled (default)
･
The frames registered in the FOMA terminal by
default are applicable to image sizes of QCIF (176 x
144), QVGA (240 x 320), V-VGA (480 x 640) and
Standby (480 x 864).
･
Frames can be set when the image size for still
images is set to a size from Sub-QCIF (128 x 96) to
Standby (480 x 864) or when the image size for
movie is set to Sub-QCIF (128 x 96) or QCIF (176 x
144).
INFORMATION
●
To select a frame from the list:
m31 z
Highlight
a frame
z o
●
If you select a frame that is opposite in horizontal and
vertical values to the image size, the frame is displayed
after rotating 90 degrees clockwise; for example,
suppose that you have selected a 144 x 176 frame when
the image size is QCIF (176 x 144). In this case, the
frame rotates 180 degrees by pressing
m33
on
the still image shooting screen or movie recording
screen. Note that your frame cannot be rotated if it is the
same as the image size in terms of horizontal and
vertical values.
●
If the frame downloaded from a site during shooting is
not displayed,
m34
on the still image shooting
screen or movie recording screen.
Set whether to use the shake reduction function.
Whiten
：
Skin-color looks brighter and whiter.
･
Recommended for indoor shooting.
Suntan
：
Skin-color looks sun-tanned.
･
Recommended for outdoor shooting.
Soft touch
：
Blurs the outlines to soften the image.
Mono tone (red)
：
Shoots images in monotone of red gradation.
Mono tone (green)
：
Shoots images in monotone of green gradation.
Mono tone (blue)
：
Shoots images in monotone of blue gradation.
Monochrome
：
Shoots images like black-and-white photographs.
Sepia
：
Shoots images in sepia colors.
Brightness
White balance
Auto
：
Adjusts white balance automatically (set by
default).
Sunlight
：
For shooting outdoor in fine weather.
Cloudy
：
For shooting in cloudy weather, shade or evening.
Fluorescent
：
For shooting under illumination such as a
fluorescent lamp.
Bulb light
：
For shooting under illumination such as an electric
bulb.
Frames
Shake reduction
Auto
：
Shake reduction is automatically activated when
the settings and conditions for shooting are likely to
cause camera shake (set by default).
OFF
：
Shake reduction is disabled.
Next
▲