Docomo FOMA D702iF, Руководства

Страница: 90 / 451

88
Mak
ing/R
e
ceiving
Videoph
one Call
s
Changing the videophone settings
Videophone Settings
Set the operation to be performed when a videophone call is not connected, the screen displayed during
a videophone call, etc.
･
The auto redial as voice function is provided to ensure access to the other party. By setting this function to
ON , a dialed videophone call will be automatically redialed as voice call if the other party’s terminal does not
support the videophone function or cannot receive the videophone call while using the mova service through
Dual Network Service. Redialing does not occur, however, if you call an ISDN-sync 64 kbps or PIAFS
access point, or an ISDN videophone incompatible with 3G-324M (as of August 2006), or if you dial the
wrong number. Note that some calls may require the call charge.
1
m873
2
Select each item to set
3
Press
p
INFORMATION
●
Even when Auto redial as voice is set to ON , redialing may not be performed depending on the situation of the other party
or the network.
●
When Auto redial as voice is set to ON , if you make a videophone call during a packet communication with a PC
connected, the call is redialed as voice call without connecting to a videophone call. During a voice call or 64K data
communication, the call is not connected to a videophone call and redialing is not performed, either.
●
If redialing as voice call occurs with
Auto redial as voice
set to
ON
, voice call charges apply instead of digital
communication charges.
●
When
Speakerphone
is set to
ON
and Silent Mode is active, if you make a videophone call, a confirmation screen
appears asking whether to switch to the speakerphone call. Select Yes or No .
Default Auto redial as voice: OFF Display setting: Both sides Sub screen: My side Screen size : Large
Visual preference: Normal Display light: Always on(normal) Speakerphone: ON
Auto redial as voice ： Sets whether to redial as voice call automatically when a videophone call is not connected.
Display setting ： Specifies whether to display either your self image or the other party’s image or both
images during a videophone call.
･
If you set other than Both sides , Sub screen cannot be set.
Sub screen ： Specifies whether to display your self image or the other party’s image on the sub
screen during a videophone call.
Screen size
：
Sets the main screen view size.
Visual preference
：
Sets the quality of outgoing image.
Display light
：
Sets the display light during a videophone call.
･
When Terminal settings is set, the setting of Display light time ( Normal use ) in Display
Light Setting (
☛
P132) applies.
Speakerphone ： Specifies whether to turn on the speakerphone function automatically once a videophone
call is connected.
Vid
e
o
phone Sett
ings